Gas Treating Plant - Operator II Job at Wink Amine Treaters Careers, Wink, TX

YndaUDY0ODNqTG1ZSWJJdlFZeFJhdldUcmc9PQ==
  • Wink Amine Treaters Careers
  • Wink, TX

Job Description

Job Description

Job Description

Job Summary

This position is responsible for safely operating a natural gas treating plant, including performing various job tasks within the same process and assisting in shutdown planning and maintenance. Plant facility processes can include gas treating operations, plant compression, dehydration equipment operation, control systems, injection systems, and other methods.

Primary Job Duties

  • Safe plant operation by planning, scheduling, and performing work, monitoring and adjusting operating parameters.
  • Monitoring in the operation of process equipment to blend, separate, and move natural gas and associated product; start, stop, and regulate pumps, compressors, and fans; turn valves and switches to regulate temperature, pressures, flow rates, and flow direction.
  • Make appropriate adjustments to dials, switches, valves, and levers in the control system to regulate and coordinate process variables (flow, temperature, pressure, vacuum, and chemicals) as specified; monitor controls to regulate temperature, pressure rate of flow, and tank levels according to process schedules; adjust control instruments, boilers, and dampers on burners in fired heaters to maintain specified firing conditions; communicate adjustments and changes to other operators and supervisors.
  • Inspect equipment, including heaters, treating units, lines, and pumps; inspect safety equipment as appropriate; communicate concerns and issues to supervisors and other departments.
  • Assist in preventive maintenance checks on running gear, making minor repairs when indicated.
  • Lubricate and clean equipment; determine repairs for scheduling; perform designated repairs and maintenance of equipment; adjust and maintain supplies of chemical additives that protect and clean process equipment.
  • Adhere to Process Safety Management (PSM) requirements and participate in program development and reviews.
  • Attend and actively participate in safety meetings and proactively support the plant safety program.
  • Understand facility regulatory requirements to operate the plant in compliance with requirements.
  • Coordinates with commercial and engineering teams providing input and ideas on projects related to gas acquisition opportunities and ongoing expansion projects.
  • Works with Operations, Engineering, Health and Safety, and Environmental Compliance and Permitting on design reviews, preconstruction items, Process Hazard Analysis (PHA), Management of Change (MOC), and Pre-Startup Safety Review (PSSR) to ensure facilities are constructed and operated per permit requirements.
  • Reviews and analyzes various operating data from Distributed Control System to monitor compliance with our air permits, and SPCC permits.
  • Performs other related duties to meet the ongoing needs of the organization as directed.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Operating natural gas-associated equipment such as reciprocating natural gas compressors, dehydrators, treating equipment, fluid separating equipment, valves, gas/liquid measurement equipment, pumps, etc. Operating the equipment and system may include, but is not limited to:
    • Start-up/shutdown of equipment
    • Monitoring and Adjusting plant control systems to maximize efficiency and operate all systems within acceptable equipment process recommendations or prescribed operating ranges
    • Inspect equipment and controls periodically to detect malfunctions or need for repair, adjustment, or lubrication.
    • De-pressuring equipment and pipelines
    • Purging/pressurizing equipment and pipelines
    • Performing gas leakage surveys
    • Operating valves
  • Implements and adheres to safe work practices and a proactive safety culture while always ensuring safety for the employee, the public, and the environment.
  • Keep leadership and customers advised of any operational changes to the treater or equipment and any safety-related conditions.
  • Ensures applicable state and federal regulatory compliance and record-keeping requirements are met and continually monitored.
  • Performs minor and major equipment maintenance, including reciprocating natural gas compressors, dehydrators, fluid separating equipment, valves, pumps, etc.
  • Coordinate activities with third-party vendors.
  • Performs special projects and other job-related duties as assigned.

Required Competencies / Prerequisites

  • High School Diploma or GED required; Bachelor’s degree preferred
  • A minimum of 5 years related experience is required; oil and gas processing experience preferred
  • A valid driver’s license and acceptable driving record
  • Willing to work overtime and respond to callouts
  • Effective communication skills, interpersonal skills, and ability to build relationships
  • Ability to work independently as well as part of a team
  • Prefer candidate with knowledge of Process Safety Management (PSM) - OSHA CFR29 1910.110 and EPA Risk Management Program – 40 CFR 68.
  • Must have computer experience, with a preference for experience in MS Word, Excel, and Outlook.
  • Must be able to communicate clearly and accurately both orally and in written format; must be able to prepare reports to convey information clearly and concisely.
  • Ability to establish and maintain effective working relationships with management, staff, customers, and the public.

Other Requirements

  • Use experience to recommend solutions to operational problems.
  • Recommend improvements in operational efficiency.
  • Emergency response: Provide incident command support to emergency responders, and lead mock and tabletop exercises.
  • Must be able to work and perform without close supervision.
  • Ability to read and interpret Piping and Instrumentation Diagram
  • Ability to work 12 – hour rotating shifts both days and nights as the role requires 24/7 responsibility
  • Ability to lift, push, and pull a minimum of 25lbs.
  • Ability to work in changing climate and conditions.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must be able to work in close quarters and frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at sites. The noise level in the work environment and job sites can be loud.

PPE (Personal Protective Equipment) required and must be worn within the Plant

  • Steel-toed safety shoes or boots (Employee must provide)
  • Safety Glasses (Provided by employer)
  • Hard hats (Provided by employer)
  • FRC (fire retardant clothing) attire (Provided by employer)
  • H2S Monitor & Proper Facility Safety Equipment (Provided by employer)

Note

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Job Tags

Contract work, Night shift, Rotating shift,

Similar Jobs

Fresenius Medical Care

Dialysis Clinical Manager Registered Nurse - RN Job at Fresenius Medical Care

 ...Job Description About this role: As a Clinical Manager with Fresenius Medical Care, you will...  ...of an accredited School of Nursing (RN). Current appropriate state licensure....  ...competencies. Rate: $88k-$140k yearly salary Non-Bonus Eligible Positions: include language... 

Ultimate Staffing

Commercial Roofing Estimator Job at Ultimate Staffing

 ...Job Description Commercial Roofing Estimator Location: Memphis, TN Compensation: $80,000 - $110,000, depending on experience A leading provider of commercial and industrial roofing services is seeking a skilled Commercial Roofing Estimator to join our... 

Unity Health Care

Medical Claims Integrity Specialist Job at Unity Health Care

Join to apply for the Medical Claims Integrity Specialist role at Unity...  ...billing and knowledge of coding, as well as a thorough understanding...  ...detail and accuracy in data entry.Ability to work independently...  ...contact with staff at all levels throughout the organization. There... 

Lightfield

Machine Learning Engineer, Applied Research and Model Development Job at Lightfield

 ...cant live without Craft Lightfield AI/ML strategy in tight collaboration with founders and execs Pioneer the training of new models that leverage both historical data and synthetic training data Prototype innovative, LLM-powered experiences, and drive their... 

BOOZ, ALLEN & HAMILTON, INC.

Digital and Model-Based Engineer, Mid Job at BOOZ, ALLEN & HAMILTON, INC.

 ...Job Description Digital and Model-Based Engineer, Mid The Opportunity: Are you looking for an opportunity to combine your technical skills with big picture thinking to make an impact in Digital Engineering ( DE ) and Unmanned Maritime Systems? You understand your...